It’s every homeowner’s goal to keep his or her home looking aesthetically appealing. Most homeowners use shrubs and trees to improve their property’s ambiance and beauty. Generally, these plants do not require a lot of maintenance. With a little maintenance, you can keep them healthy.

One of the best maintenance practices for both trees and shrubs is pruning. Pruning can help promote plant growth. It can also increase the plant’s resistance to insects and diseases. Healthier plants are more visually appealing. Most property owners aren’t aware of the tree pruning cost they may incur if they do decide to improve their home’s aesthetic appeal. In this article, we will show you the tree pruning cost to expect.

Tucson Tree Pruning Cost

The tree pruning cost ranges between $176 and $658. On average, homeowners should expect to spend $417 on the tree pruning. Considering the benefits of pruning, spending an average of $417 on the activity is worth it. If you ignore tree and shrubs pruning or trimming, the plants may grow to a point where they become too dense. This could keep sunlight from touching the plants interior and rainwater from reaching the roots. The plants may look lush on the outside, however, on the inside, they will be dying slowly.

Tucson Tree Pruning Cost Factors

Tree pruning cost is not the same for all trees. The price varies. Some of the factors that affect Tucson tree pruning cost include:

  • The tree’s size
  • The tree’s geographical location
  • Tree type
  • The tree’s health

If your goal is to prune huge trees, your tree pruning cost may be higher. If the trees are close to power lines, you may have to spend more money compared to a homeowner whose trees are not close to the power lines. If your tree has thick branches, they could make the pruner’s job more difficult. Thick branches are often hard to cut. Trees with pests or diseases often require more work during pruning compared to healthy trees. This means that the tree pruning cost for the diseased trees or trees which have pests may be higher.

Factors Influencing Tree Pruning Timing

Tree pruning timing depends on several factors. These factors include:

  • Safety – Trees are capable of growing too close to utility lines such that they become dangerous. Also, some trees are capable of obstructing your vision while you drive. Broken or dead branches can fall off unexpectedly. This could cause risk to both your property’s and family’s safety.
  • Health – A wide range of tree health issues can be solved by simply pruning the trees. If you catch the disease early, you can cut it before it gets the chance to spread.
  • Aesthetics – As long as the tree pruner avoids giving your tree an unnatural size or shape, tree pruning helps improve the tree’s aesthetic appeal.

The ideal time to prune trees is when they are dormant. The term “dormant” refers to the period when the tree is not growing. Different trees have varying growth periods. Understanding the tree’s growth period can help you prune your trees at the right time. The only time you may need to prune your trees while they are actively growing is if they cause a safety hazard.

Tucson Tree Pruning Cost for Large Trees

The tree pruning cost for larger trees is higher compared to the cost of pruning smaller trees. Bigger trees often have more branches. Also, their height and width make accessibility difficult.

On average, if your tree’s height is over 60 feet, you should expect to spend approximately $800 to $1000 on the pruning. This price will depend on 2 main factors. The factors are:

  • The number of trees you intend to prune.
  • The location of the tree.

Taller trees will incur more costs. Before proceeding with the project, it is crucial that you get a quote from professionals who offer tree pruning services.

Additional Tucson Tree Pruning Cost Considerations

You may have to deal with extra costs during your tree pruning project. A good example of an extra cost you may have to deal with is a travel fee. If the tree pruner has to travel a long distance before getting to your property, you may need to pay the travel fee. Also, you may have to pay for materials, labor, equipment, and other extra factors such as pesticide application and disease control. Request the tree pruning professional to include all possible extra costs in the quote.

Seasonal Factors

Different trees will enter their dormant phase at varying stages. However, a basic season pattern that can be followed when caring for trees is available. We have outlined this pattern below:


During the spring season, focus on watering and fertilizing your trees. This will help the plants grow stronger and healthier for the summer. Most trees grow actively during the spring season. Hence, pruning trees during the spring season is not recommended. The spring season is an ideal time to plant more trees.


During the summer, the best thing to do is to leave the trees alone. If necessary, you can remove hazards or perform minor trimming. If the weather is unusually dry, you can water the trees. If you water the grass in your compound regularly, you may skip watering the trees.


Most trees will go into their dormant phase during the fall season. You can perform major trimming and pruning operations in the fall. This will help you prepare the trees for the next year. Some of the maintenance practices you can carry out during the fall include:

  • Trimming both the sides and the top to increase sunlight access.
  • Remove any diseased or dead branches.
  • Shape the plant.


During winter, it is a good idea to avoid bothering the plants. If required, you can protect the trees against both the snow and cold. If you have trees in your compound that are already dead, dying, or can potentially damage your home, you can cut them in winter. Winter may also be an ideal time to prune some of your trees.

Fruit Tree Pruning

For fruit trees to produce high-quality fruits each year, they need regular pruning. If you leave dead or diseased branches on the fruit trees, you could jeopardize the quantity and quality of the fruits produced. Below, we have crucial things that need to be considered when pruning various fruit trees.

Apple Trees

Apple trees should be pruned during the early winter or late spring. For the first six years of the tree’s life, this is extremely crucial. You will be teaching the tree to keep growing in an upward and conical shape. To raise the tree’s base, the lower branches need to be pruned. Also, any branches that aren’t maintaining upward growth have to be removed. Prune older trees to promote apple growth and maintain the conical shape.

Lemon Trees

The ideal time to prune lemon trees is immediately after the fruit-bearing season is over. The first thing you should do is cut any diseased or dead branches. Branches whose thickness is less than that of a pencil should be removed too. To prevent insects, branches that touch the ground should be cut off. Also, remove any branches growing vertically and those that close other branches. To ensure that the tree has access to enough sunlight, thin it.


Plum trees are supposed to be trimmed between August and June. The ideal time to prune the trees is in the summer. Wet weather often causes fungal infections to plum trees. Hence, you should focus on pruning the trees on dry, clear days. When pruning plum trees, the moisture present in the air should be as little as possible. Plum trees need annual pruning. Since they are very resilient, over-trimming the trees will not hurt them. Remove the plant’s lower branches. Also, ensure that the tree has access to enough sunlight.

Cherry Trees

The ideal time to prune the cherry trees is in the early fall. This is when these trees enter the dormant stage. When pruning the cherry trees, it is crucial that you remove the suckers or the sprouts. The suckers/sprouts are generally new growths which appear at the ground level. It is important that you avoid making too many cuts all over the cherry tree. The branches that meet the tree trunk should be left on the tree. You should remove the stems that take away from the tree’s beauty and growth. The tree’s natural shape should guide you during pruning.

Fig Trees

After transplanting your fig tree, you should focus on pruning it a couple of times over the initial winter season. You can remove up to 50% of the fig tree’s branch growth without harming/damaging the plant. The pruning helps the fig tree develop a strong root system capable of supporting it over the years. Over time, you should focus on trimming your tree such that the branches it grows are both horizontal and low. Select 4 to 6 main branches that should hold the fruits. Ensure you remove any suckers available at the base. This will help the tree stay healthy.

DIY Tree Pruning

Some property owners may choose to prune their trees themselves. For you to trim the trees effectively, it is crucial that you understand the basic pruning techniques. Also, you should use the right pruning tools. You can damage your tree irreparably if you prune it the wrong way.

Tree Pruning Tips and Techniques

To select the right branches to remove from the tree, you need to consider their size first. You can cut all the branches whose diameter is less than 2 inches or 5 centimeters. Before cutting the branches whose diameter ranges between 2 and 10 inches (5 and 10 centimeters), consider the branches carefully. If you are unsure whether to cut the branch or leave it on the tree, leave the branch on the tree. Branches whose diameters are bigger than 4 inches or 10 centimeters should be allowed to remain on the tree. However, if you have a good reason to cut them, you can remove the branches. Good reasons to remove branches whose diameters exceed 10 centimeters include diseases or when they become a safety hazard.

You can select the branches to cut after checking the angle these branches make with other branches. Any branch that makes a weak, V-shaped angle is ideal for cutting. Branches which make a U-shaped angle should be left on the tree. The ratio to aim for between the crown size and height is usually 2 to 3. It is crucial that you avoid cutting more than 25% of the tree’s crown at once.

Below, we have outlined the 3 basic crown work techniques:

Crown Thinning

This refers to the process of removing branches from the outer edges and the top. Only excess branches are removed. Crown thinning allows other branches to grow strong. Branches that rub against or cross other branches are removed when thinning the crown. Even spaces are supposed to be kept between the tree’s lateral branches.

Crown Raising

This involves removing excess foliage and branches from the tree’s bottom. The major reason why branches and foliage are removed from the tree’s bottom is to eliminate road and sidewalk obstruction. It is important to make sure that branches are kept at least 2-thirds of the height of the tree.

Crown Reduction

This involves removing foliage and branches from the top of the tree. If this activity can be avoided, it should be avoided. Crown reduction should only be done when it is absolutely necessary. For example, when it can help improve the tree’s health or improve safety.

Before cutting a branch from a tree, the pruner is supposed to identify its base and ridge. The ridge is supposed to be parallel to the branch. The pruner should cut the branch outside the ridge and away from its collar.

Tools and Materials Used When Pruning Trees

For you to prune your tree successfully, you need to have the right tree pruning tools. The common tree pruning tools include:

  • Bypass Pruner – This tool has a sharp and curved blade. It makes accessing narrow-angled stems easier. Its sharp blade cuts cleanly.
  • Looping Shears – These offer extra leverage. They are ideal for stems that are slightly bigger. Compared to anvil blades, gear joints, or ratchet, the bypass is a much better option. Some shears are equipped with shock absorption features. These features help reduce arm fatigue.
  • Pruning Saws – Pruning saws vary depending on the branch type you intend to cut. If your goal is to cut branches whose diameter does not exceed 2 inches, fine-toothed saws will be ideal for you. If you intend to cut branches whose diameter exceeds 3 inches, you can use the coarse-toothed saws.
  • Pole Pruners – These are ideal for pruning the branches that are high up the tree, where using the ladder could damage the tree or is inconvenient. The only difference between the pole pruners and the regular pruners is that the pole pruners are usually set on a long pole and their mechanism is activated using a rope.
  • Hedge Clippers – These are ideal for cutting the thin stems belonging to shrubs and hedges.

After pruning a tree, it is crucial to clean the tools before moving on to the next tree. This helps avoid communicating diseases from one tree to another. Pruning tools shouldn’t be cleaned using bleach or household cleaners. Rubbing alcohol with a concentration of 70% or more is the ideal cleaning agent.